MINI MIXED CONSTRUCTION PACKS
Regular price $45.00Our STUNNING Mini Mixed Construction Collection has been created in value pack sizes to enable a tiny feature or repeat pattern for a wallpaper look. These all measure approximately 20cm in width - our smallest designs. See images for exact pack size breakdowns.
- Mini Construction Set: One of each piece in the collection in mini size - a tiny feature pack.
- Mini Cluster Pack: 16 Mini Mixed Construction Vehicles - intended to cover a very small area for a small repeat pattern feature.
- Mini 1/2 Pack: 24 Mini Mixed Construction Vehicles - intended to cover half a standard wall (based off standard wall 2.4 high x 3m wide at 30cm apart.
- Mini 3/4 Pack: 32 Mini Mixed Construction Vehicles - intended to cover 3/4 wall (based off standard wall 2.4 high-3m wide however, could do full wall with larger spacing.
- Mini Full Pack (featured image with Concrete Truck minis): 48 Mini Mixed Construction Vehicles - intended to cover a Full Wall (based off standard wall 2.4 high x 3m wide) with 30cm spacing.
PRODUCT DETAILS (see images for exact construction vehicle product images for pack size components and sizing breakdowns).
* Quick installation - simply peel & stick (easy-to-understand application instructions included)
* Cut from specialised fabric specifically designed for home décor - removable peel and stick adhesive.
* No Borders
* Matte finish
* Easily removable without causing wall damage (however, do not use on bubbling paint).
Note: Wall must not be textured ie. concrete, rendered or brick wall. Only apply to a smooth, dry and clean surface.
Allow newly painted walls at least 40 days to outgas before application. Ensure you have used a good quality primer and please review our Check your Paint section below prior to purchasing. Please read disclaimer section below prior to purchase.
DO NOT use on bubbling or peeling paint. Walls must be smooth – they will not adhere to textured surfaces ie. rough concrete, rendered or brick wall.
It is very important that you allow at least 40 days concerning a newly painted surface to dry. Bubbles or failure can occur if the paint is still outgassing/flashing off. Also make sure all drywall painted surfaces or a repainted surface have been primed (with a good quality primer) and painted in order to not leave possible residue or peel paint upon removal.
If you are unsure about a particular paint product, please contact & check with the brand of paint you have used prior to application to ensure it is suitable for your wall covering needs.
Little Rae Prints removable and resuable Wall Decals are made from a patented adhesive material (100% polyester fabric). There is no Glycol-Ether or Formaldehyde in the adhesive and no Phthalates. Its environmentally safe and biodegradable over time, no PVC and nontoxic.
It is great for application on smooth, interior walls. This includes most flat, semi-gloss and gloss paint finishes. Easily removable peel and stick adhesive without causing wall damage (however, do not use on bubbling paint).
Little Rae Prints “Peel & Stick” decals are painted, designed and printed right here in Australia.
Absolutely! We've specially designed our decals to be pre-cut and ready for you to simply peel, stick and smooth onto your wall. It is designed not to rip or wrinkle and can be pulled apart if it sticks to itself during installation! Our larger decals come in pieces for ease of application. These ones overlap by 10mm when joining together on the wall to ensure the pattern lines up perfectly.
> TIP: Use blu tac to figure out placement on wall with backing first.
> Need Inspiration? Head to Instagram.com/littleraeprints.
Be sure to keep the backing paper the decal arrived on as if you ever want to reuse this is how you transport.
Don't forget to share how you style your decals with us on Instagram!
Little Rae Prints 'Peel & Stick' decals comes with fully detailed instructions and we're always here to answer any questions you may have.
If a bubble appears over the days following your installation, pressing and lightly smoothing can remove it. This can occasionally happen if oil, dirt or dust is on your surface. You can use a sewing pin to pop the bubble and re-smooth with your fingers to allow the trapped air out. In the rare instance bubbles continue to re-appear, this generally indicates that something is preventing the adhesive from sticking - you may need to relocate your wallpaper, decals or mural. Most bubbles are caused by walls that are recently painted (in the last 30 days) or cleaning chemicals that were used prior to installation and not removed with a warm, damp cloth.
Little Rae Prints ship worldwide and if you spend $150AUD or more you will get FREE standard shipping.
We dispatch Monday to Friday and within 48 - 72 business hours from time of purchase. Our custom name decals are shipped within 10 business days due to custom nature of the product. Shipment times may vary in sale and holiday periods and if the product stipulates otherwise
Please visit our Shipping or FAQs page for more detailed information.
